All commercial building managers understand that providing reliable and safe rooftop access is essential to properly maintain any equipment. However, it can be difficult to access this equipment. You may run into safety and logistical problems if you don’t plan properly. A complete rooftop access system is the best way to make sure workers have easy access to their roofs. This includes roof plant platform, stairs, crossovers, and crossovers.

What’s the most important equipment to provide with roof access?

A commercial roof is an open, large space that is difficult to see from below. It’s the ideal place to store large, noisy, and otherwise unattractive roof equipment–outside of sight, outside of the mind. It’s not always easy to find what is out of reach and out of mind when it comes time for maintenance or repairs.

This equipment is essential for the continued operation of the commercial building. Some equipment is more important than others. Which equipment is your top priority for roof access?

Electrical Cables and Pipes

Without electricity and running water, tenants will feel very uncomfortable. Your pipes and cable runs should be placed parallel to your roof access walkways. This will allow workers to reach their entire length without touching the roof.

HVAC and Ducts

Your tenants will also feel uncomfortable if there is no heat in the winter and cold air in the summer. Where possible, HVAC ducts should be located alongside cable runs. HVAC pumps should also be placed on equipment platforms. Accessible via stairs, HVAC pumps should be placed on the platforms.

Elevator Equipment

There is a good chance that your building has an elevator if it is multi-story. (rooftop access walkways and equipment platforms. stairs and crossovers. Your workers will be able to get to where they need to without putting themselves in danger. This is an important consideration. This is a critical consideration. Roof workers are more at risk of falling and tripping on the roof. Handrails make this safer. A customized system will make your roof safer and easier to access, which makes it easier for workers and tenants to maintain and repair critical systems.

Protect Your Workforce

These are the best ways to increase safety, meet industry standards, and avoid injury on your roof.

Walkways

Roof access walkways are a primary method of ensuring safety from the roof of commercial buildings. These walkways allow workers to follow a clear path that is free from hazards and provide handrails that meet OSHA standards. Roof access walkways offer workers an elevated path that allows them to inspect the roof from a high vantage point. They also have non-penetrating fasteners that protect and preserve the membrane.

Crossover Ramps

Pipes, cables, ducts, and cables are often elevated from the roof’s surface to protect it from excessive heat, cold, and fire hazards. This equipment can also make your cables and pipes into obstacles. Crossover ramps or stairways with handrails are the best way for workers to move around these obstacles. These handrails are OSHA compliant and will not allow your workers to come in contact with hot pipes or live wires.

Access Platforms

Most likely, your roof houses some capital equipment that keeps your building in good condition. This equipment could include HVAC equipment, elevator machinery, and solar panels. These equipment are often raised above the roof’s surface for the same reasons as one might lift cables and pipes. It requires access platforms to allow workers to perform maintenance and repair.

Leave a Reply

Your email address will not be published. Required fields are marked *